Life Fitness Axiom OP-BT Assembly Instructions Manual page 32

3. Install screws and washers securing the arm pad to the pad mount assembly using an 8mm Allen wrench.
Install Seat
1. Pull detent pin out and slide the seat post assembly down into the main frame assembly.
TIP: Break-Free CLP can be used to lubricate the seat post assembly. Spray Break-Free CLP, or apply with a cloth,
to the plated seat post.
2. Install screws securing the seat glide bushing to the main frame assembly using a Phillips screwdriver.
3. Install screws and washers securing the seat pad to the seat post assembly using an 8mm Allen wrench.
Item
1
2
3
4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Item
1
2
3
4
Tighten hardware to 30-39 in-lbs (3.4-4.4 Nm).
Item
1
2
3
4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 30 of 40
Description
Arm Pad
Pad Mount Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 35mm
Description
Seat Post Assembly
Seat Glide Bushing
Main Frame Assembly
Screw, M5 x 10, Phillips
Description
Seat Pad
Seat Post Assembly
Washer, Flat 3/8"
Screw, M10 x 1.5, 25mm
Qty.
1
1
4
4
Qty.
1
1
1
2
Qty.
1
1
4
4