Table of Contents
Advertisement
11. Place end support assembly onto the input weldment and rotate up to align with holes on the tower frame.
12. Install screws and washers securing the end support assembly to the tower frame using an 8mm Allen wrench.
13. Install screw and washer securing the end support assembly to the input weldment using a 17mm wrench.
14. Test unit for proper operation.
15. Tighten all loose hardware in
16. Tighten all loose hardware in
Install Work Arm Assembly
Assemble Frame Components
Page 26 of 40
Item
Description
1
End Support Assembly
2
Tower Frame
Item
Description
1
End Support Assembly
2
Tower Frame
3
Screw, M10 x 1.5, 25mm
4
Washer, Flat 3/8"
Loosely hand tighten hardware.
Item
Description
1
End Support Assembly
2
Input Weldment
3
Screw, M10 x 1.5, 30mm Hex Head
4
Washer, Fender 3/8"
Loosely hand tighten hardware.
and
Install Cam Assemblies
to 20-25 ft-lb (27.1-33.9 Nm).
Qty.
1
1
Qty.
1
1
4
4
Qty.
to 20 ft-lb (27.1 Nm).
1
1
1
1
Advertisement
Table of Contents
