Adding Dishwasher Salt - Hanseatic HGTI4582E97736BS User Manual

Page EN-16 Dishwasher detergents, rinse aids and dishwasher salts

Adding dishwasher salt

NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface, its seals and
fi lters by using dishwasher salt in an im-
proper manner.
Only use dishwasher salt which is suit-
■
able for dishwashers.
Always wipe away split dishwasher
■
salt immediately with a damp cloth.
Immediately after adding the dish-
■
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher
salt to the dishwasher salt dispenser
– if you are only using multitabs which al-
ready contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– when the "Add dishwasher salt" indicator
(13) lights up.
1. Remove the lower dish rack.
2. Turn the cover on the dishwasher salt dis-
3. Upon first use: Add 1.5 l water to the dish-
4. Place the supplied filling funnel (c) on the
5. Add dishwasher salt up to the edge of the
6. Stir the dishwasher salt using the end of a
7. Turn the cover of the dishwasher salt
8. Replace the lower dish rack (16).
9. Launch a dishwashing programme
(13)
(19)
penser (19) anticlockwise and remove it.
washer salt chamber so that it doesn't
clump.
(c)
dispenser opening.
compartment.
spoon or similar.
compartment (19) in a clockwise direction
up to the stop point.
straight away or carry out a test run
immediately upon first use using
(see "Test run" on page EN-35).