Using Multitabs; Adding Rinse Aid - Hanseatic HGTI4582E97736BS User Manual

Page EN-14 Dishwasher detergents, rinse aids and dishwasher salts

Using multitabs

Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case,
you can ignore notifications that rinse aid (12)
and dishwasher salt (13) need to be topped up.
If your water is in the
– "soft" to "medium" hardness range, multi-
tabs will deliver good results.
– "hard" range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt and
rinse aid individually.
Determine and set the water hardness
(see "Adjusting the water hardness
level" on page EN-34).
1. Pull back the catch (25) on the detergent
dispenser (21). The cover will pop open.
2. Place a multitab in the compartment (A)
of the detergent dispenser (21).
3. Push the dispenser cover closed so that
the catch (25) clicks into place once again.

Adding rinse aid

Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
(12)
compromise the rinsing results.
(13)
■
■
Using unsuitable substances can cause
damage to the dishwasher.
■
exclusively using multitabs which already
contain rinse aid.
Add rinse aid:
– prior to the first use,
– when the "Add rinse aid" indicator lights up
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
NOTICE
Wipe away rinse aid which has over-
fl owed immediately.
Take note of the markings for the
maximum fi ll quantities ("max") in
the rinse aid chamber.
Only put rinse aids which are suita-
ble for dishwashers into the rinse aid
chamber.
You do not need to add rinse aid to the
detergent compartment if you are
(12).
(12)