Dishwasher Operation; Before Getting Started; Preparation; Selecting And Starting The Dishwashing Programme - Hanseatic HGTI4582E97736BS User Manual

Page EN-22

Dishwasher operation

Dishwasher operation

Before getting started

• Read the 'Safety' chapter from page EN-4,
in particular the safety notices.
• Set up and connect the appliance as de-
scribed in chapter "Installation, assembly,
connection and initial commissioning" on
page EN-28.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.

Preparation

1. Open the tap completely.
2. Close the dishwasher door.
3. Press the button (1) to switch on the
dishwasher.
You will hear a signal tone and all LEDs will
illuminate briefly.
After a moment, the ECO programme LED
will light up.
Protecting the environment
– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified
capacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see "Loading the
dishwasher" on page EN-17).
– Manual pre-rinsing of the dishes leads to
higher water and energy consumption and
is not recommended.
– Cleaning dishes in your appliance
generally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Selecting and starting the
dishwashing programme
It is recommended that you carry
out a test run before the fi rst dish-
washer cycle in order to remove residues
from the manufacturing process and in
order to ensure that the appliance functions
perfectly. Carry out this test run when the
dishwasher is empty and without any dish-
washer detergent.
1. Search for the appropriate dishwashing
programme with the help of the
"programme table", see page EN-21.
2. Press the P button (9) repeatedly until
the LED to the right of the desired pro-
gramme symbol lights up.
3. Press the button (10) to start the dish-
washing programme.
The LED to the right of the programme
symbol will flash while the programme is
running.
4. Once the programme has finished, a signal
tone will sound and the LED to the right of
the programme symbol will stop flashing.
Now turn off the water tap and press the
(1) button to switch off the dishwasher.
5. Wait a little while before unloading the
dishes.

Additional options

You can combine the various dishwashing
programmes (6) with additional options.
The additional options must be selected be-
fore starting the dishwashing programme.
(9) (10)