Test Run - Hanseatic HGTI4582E97736BS User Manual

Installation, assembly, connection and initial commissioning

Test run

It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and in order to ensure that the de-
vice functions perfectly. Carry out this test run
when the dishwasher is empty and without
any dishwasher detergent.
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the button (1) to switch on the
dishwasher. You will hear a signal tone
and all LEDs will illuminate briefly.
After a moment, the ECO programme
LED will light up.
4. Press the P button (9) repeatedly until the
LED to the right of the
symbol lights up.
5. Start the cycle with the button
The programme begins after a few
seconds.
6. Ensure that no water is coming out and
no unusual sounds can be heard.
7. When the programme is finished,
an acoustic signal will sound. Switch the
dishwasher off using the button (1).
8. Slightly open the door to allow the moist
air to escape.
9. Close the tap.
If no water has escaped and no unusual nois-
es have been heard, the dishwasher is ready
for operation and you can now load it with
dishes.
programme
(10).
Page EN-35