Changing Or Deleting The Sequential Broadcast Transmission Program; Changing Or Deleting The Specified-Time Transmission Program - Konica Minolta bizhub 306 User Manual

7
7.2.9

Changing or deleting the sequential broadcast transmission program

1
Press the Utility key.
2
Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3
Use the +/, key to select [PROGRAM DIAL], then press the OK key.
4
Press the One-Touch Dial Key that contains the sequential broadcast transmission program you want
to change or delete.
5
Use the +/, key to select [EDIT] or [DELETE], then press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6
Use the +/, key to select [ADD] or [CHECK/EDIT], then press the OK key.
% If [ADD] is selected, enter a destination, then press the OK key.
% If [CHECK/EDIT] is selected, go to the next step.
7
Use the +/, key to select a target destination, then press the OK key.
% To delete the displayed destination, press the Clear/Stop key, then select [YES] in the displayed
screen.
% Repeat this procedure until checking and correcting a destination is completed. After this, press the
Back key.
8
Select [RETURN], then press the OK key.
This registers settings, and returns to the Store Address screen.
7.2.10

Changing or deleting the specified-time transmission program

1
Press the Utility key.
2
Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3
Use the +/, key to select [PROGRAM DIAL], then press the OK key.
4
Press the One-Touch Dial Key that contains the specified-time transmission program you want to
change or delete.
5
Use the +/, key to select [EDIT] or [DELETE], then press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6
Enter the transmission time using the Keypad, then press the OK key.
7
Change the destination setting as necessary, then press the OK key.
This registers settings, and returns to the Store Address screen.
7-14
TIMER TX
TIMER
Store Address 7.2
bizhub 306/266