What To Do If; Installation - Progress PBN1310 User Manual

WHAT TO DO IF...

Warning! Refer to "Safety information"
chapter.
Problem
The appliance does not heat
up.
The oven lamp does not oper-
ate.
Steam and condensation settle
on the food and in the appli-
ance.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
Possible cause
The appliance is deactivated.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the appli-
ance for too long .
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
Remedy
Activate the appliance. Refer to
"Daily use".
Do a check of the fuse. If the
fuse is released more than one
time, contact a qualified electri-
cian .
Replace the oven lamp.
Do not let the dishes to stay in
the appliance for more than
15-20 minutes after the cook-
ing ends.
.........................................
.........................................
.........................................
progress 29