Menu item
Timeouts
Power Saver Mode
Disabled
2–240
Timeouts
Screen Timeout
15–300
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
Disabled
5–255
Print Recovery
Auto Continue
Disabled
5–255
Description
Specifies the number of minutes of inactivity before some systems
begin entering a minimum power state.
Notes:
30 minutes is the factory default setting.
•
Power Saver does not interact with Standby Mode.
•
Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Sets the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the remainder of the print
job
Notes:
90 seconds is the factory default setting.
•
When the timer expires, any partially printed page still in the
•
printer is printed, and then the printer checks to see if any new
print jobs are waiting.
Print Timeout is available only when using PCL or PPDS
•
emulation. This setting has no effect on PostScript emulation
print jobs.
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
•
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.
Sets the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue
Notes:
30 seconds is the factory default setting.
•
This menu item appears only when a printer hard disk is
•
installed.
Lets the printer automatically continue printing from certain
offline situations when not resolved within the specified time
period
Notes:
Disabled is the factory default setting.
•
5–255 is a range of time in seconds.
•
Understanding printer menus
185