Using The Embedded Web Server For Fax Setup; Setting The Date And Time; Turning Daylight Saving Time On Or Off - Dell 3335dn User Manual

Using the Embedded Web Server for fax setup

1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
5
Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6
Click inside the Station Number box, and then enter the printer fax number.
7
Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have
to reset the date and time.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
3
Click Security.
4
Click Set Date and Time.
5
Click inside the Set Date & Time box, and then enter the current date and time.
6
Click Submit.

Turning daylight saving time on or off

The printer can be set to automatically adjust for daylight saving time for certain time zones:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click Settings.
3
Click Security.
4
Click Set Date and Time.
5
Select Automatically Observe DST.
6
Click Submit.
Faxing
136