Recycling Dell Products; Moving The Printer To Another Location - Dell 3335dn User Manual

7
After you replace the photoconductor kit, reset the photoconductor counter. To reset the counter, see the
instruction sheet that came with the new photoconductor kit.
Warning—Potential Damage: Resetting the photoconductor counter without replacing the photoconductor
may damage your printer and void your warranty.
8
Close the front door.

Recycling Dell products

To return Dell products for recycling:
1
Visit our Web site at www.dell.com/recycling.
2
Select your country from the list.
3
Follow the instructions on the computer screen.

Moving the printer to another location

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer
warranty.
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to move it safely.
CAUTION—POTENTIAL INJURY: Follow these guidelines to avoid personal injury or printer damage:
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
•
Disconnect all cords and cables from the printer before moving it.
•
Remove all printer options before moving the printer.
•
Use the handholds located on both sides of the printer to lift it.
•
Make sure your fingers are not under the printer when you set it down.
•
Before setting up the printer, make sure there is adequate clearance around it. For more information, see
•
"Selecting a location for the printer" on page 20.
Maintaining the printer
236