Print Settings - Dell 3335dn User Manual

Menu item
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray <x>
Manual Feeder
Blank Pages
Do Not Print
Print

Print Settings

Setup menu
Menu item
Printer Language
PCL Emulation
PS Emulation
PPDS Emulation
Print Area
Normal
Whole Page
Description
Places a sheet of paper between pages, copies, or jobs based on the value selected
Note: None is the factory default setting.
Specifies a paper source
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Description
Sets the default printer language
Notes:
PCL emulation uses a PCL interpreter for processing print
•
jobs. PostScript emulation uses a PS interpreter for processing
print jobs.
PCL is the factory default printer language.
•
Setting a printer language as the default does not prevent a
•
software program from sending print jobs that use another
printer language.
Sets the logical and physical printable area
Notes:
This menu does not appear if Edge to Edge is enabled in the
•
printer Setup menu.
Normal is the factory default setting. When attempting to
•
print data in the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
The Whole Page setting allows the image to be moved into
•
the non-printable area defined by the Normal setting, but the
printer will clip the image at the Normal setting boundary.
The Whole Page setting only affects pages printed using a
•
PCL 5e interpreter. This setting has no effect on pages printed
using the PCL XL or PostScript interpreter.
Understanding printer menus
215