Advertisement
Computer Instructions
1. Display time 00:00 – 99:59 min.
4. Display speed in km/h
5. Reset-Button
to clear training data
Operating Instructions Computer
CTX- Magnetic
Batteries:
Open the battery case at the backside of the computer
and insert 2 batteries Mignon AA 1.5V or UM- 3.
The battery life is approx. 1 year under normal usage.
When taking out batteries all functional values will be
reset to zero.
Auto Power On/Off
As long as the wheel is in motion, the computer is in
action. If there is no moving within 4 minutes, the
computer will turn off automatically.
Beginning of Training
Please see attached Training Instructions
To set all values back to zero, hold down the
Reset-Button (5) for more than 3 seconds.
You may start training now.
The data for time, distance and energy consumption will
be counted upwards.
To display the pulse rate please use the ear clip or the
ENERGETICS chest transmitter set (option).
After having finished a trainning session the achieved
rates will be frozen until the monitor turns off.
Computer Functions
Odometer
The Odometer function accumulates the total kilometers
from all the workouts since the batteries were installed.
To display Odometer press the Reset-button (5) until
signal appears in the Odometer display.
In the Odometer display the current values of energy
consumption and time will also be shown.
Time:
Press the Reset-button (5) until signal appears in the
Odometer display. The current time will be shown.
(0-99)
Energy consumption:
Press the Reset-button (5) until signal appears in the
Odometer display. The current energy consumption in
kcal will be shown.
Speed
The current speed will be shown on the lower left display
whenever signals are sensored.
Distance
The current distance will be shown on the lower right
display whenever signals are sensored.
Heart rate measurement
To display the pulse rate please use the ear clip or the
ENERGETICS chest transmitter set (option).
Before using the clip rub your earlobe several times
between your thumb and index finger to optimise flow of
blood.
After a few seconds your pulse rate will be shown on the
display.
Reset-button:
If the Reset-button (5) is pressed for more than 3 seconds,
all entered rates will go back to zero.
- 13 -
2. Display energy consumption
in kcal (0.1-999.9)
3. Display accumulated
distance in km (1-9999).
6. Display of covered
distance in km (0.1-999.9)
7. Connection of ear clip wire.
Advertisement
