Table of Contents
Advertisement
NOTE:
The net config command with the float option is the only way to configure a floating IP address. There is no
method available in DD System Manager to configure a floating IP address.
# net config eth1a 2.2.2.1 netmask 255.255.255.0 type floating
11. Add the SSD enclosure to cache tier.
Run the following command: storage add tier cache enclosure<enclosure number>
12. Enable the filesystem on node 0.
Run the following command: filesys enable
86
Configure System for Use
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Domain DD9800 and is the answer not in the manual?
Questions and answers