Dell EMC Data Domain DD9300 Installation Manual page 65

4. Enter the DNS (Domain Name System) domain name; for example, yourcompany.com. Or accept the domain name, if the
system was able to discover it.
Domainname
Enter your DNS domainname []:
5. Enable and configure each Ethernet interface. Accept or decline DHCP for each interface. If the port does not use DHCP to
discover network parameters automatically, enter the information manually.
Ethernet port ethMa
Enable Ethernet port ethMa (yes|no|?) [no]:
yes
Use DHCP on Ethernet port ethMa (yes|no|?) [no]:
Enter the IP address for ethMa [192.168.10.185]:
Enter the netmask for ethMa [255.255.255.0]:
Ethernet port ethMb
Enable Ethernet port ethMb (yes|no|?) [no]:
no
6. Enter the IP address of the default routing gateway. Or accept the default gateway, if the system was able to discover it.
Default Gateway
Enter the default gateway IP address:
192.168.10.1
7. Enter the IPv6 address of the default routing gateway. Or accept the IPv6 address of the default gateway, if the system was
able to discover it. If IPv6 is not in use, leave the field empty, and press Enter to continue.
IPV6 Default Gateway
Enter the ipv6 default gateway IP address:
8. Enter up to three DNS servers to use for resolving host names to IP addresses. Use a comma-separated or space-separated
list. Enter a space for no DNS servers. Or accept the IP addresses of the DNS servers, if the system was able to discover
them.
DNS Servers
Enter the DNS Server list (zero, one, two or three IP addresses):
192.168.10.1
9. A summary of the network settings is displayed. You can accept the settings (Save), reject the settings and exit to the CLI
(Cancel), or return to the beginning of the current section and change the settings (Retry). Entering Retry displays your
previous responses for each prompt. Press Return to accept the displayed value or enter a new one.
Pending Network Settings
Hostname
Domain name
Default Gateway
DNS Server List
----- -------
---------------
ethMa yes
255.255.252.0
ethMb no
a
ethMc no
a
ethMd no
a
eth5a no
a
eth5b no
a
eth6a yes
specified) n/a
eth6b yes
specified) n/a
dd9300.example.com
example.com
192.168.10.1
192.168.10.1
------- ----
---- ------------------
running no
n/a
down ipv4
n/a
down ipv4
n/a
down ipv4
n/a
down no
n/a
down no
n/a
running no
running no
------------------------------------
192.168.10.1
fe80::3680:dff:fe42:2660**
2620:0:170:2532:3680:dff:fe42:2660**
n/a
n/a
n/a
n/a
n/a
(not specified)
fe80::f6e9:d4ff:fe7f:eea0
(not specified)
fe80::f6e9:d4ff:fe7f:eea1
/64
/64
n/
n/
n/
n/
n/
(not
/64
(not
/64
Configure System for Use 65