36
Adv a n c ed Fe a tu r es
Security
The computer provides the following methods of physically securing the
chassis:
•
Chassis intrusion detection
•
Security cable slot and padlock ring
Chassis Intrusion Detection
The chassis intrusion monitor can detect whether the chassis is opened.
The Chassis Intrusion option in
monitor.
Enter
system
setup.
1
Press the down-arrow key to move to the System Security option.
2
Press <Enter> to access the System Security option's pop-up menu.
3
Press the down-arrow key to move to the Chassis Intrusion option.
4
Press the spacebar to select an option setting.
5
Option settings:
•
Enabled (the default) — When the computer cover is removed with
this setting, a DMI event is generated, the setting changes to
Detected, and the following message appears during the boot routine
at the next system start-up:
Alert! Cover was previously removed.
To reset the Detected setting, enter
power-on self-test (POST). In the Chassis Intrusion option, press the
left- or right-arrow key to select Reset, and then choose Enabled,
Enabled-Silent, or Disabled.
•
Enabled-Silent — When the computer cover is removed with this
setting, a DMI event is generated and the setting changes to Detected,
but the alert message does not appear during the boot sequence at the
next system start-up.
•
Disabled — No intrusion monitoring occurs and no messages appear.
system setup
displays the status of the
system setup
during the system's