Disk Drives And Media; Installing A Cd, Zip, Or Other Externally Accessible Drive In A Mini Tower Chassis - Dell Precision 330 User Manual

Dell precision 330: users guide
Hide thumbs Also See for Precision 330:
Table of Contents

Advertisement

Press the module straight down into the socket until the securing clips
3
snap into place at the ends of the module.
I n s t a l l i n g a M e m o r y M o d u l e
securing clips (2)
slots (2)

Disk Drives and Media

Installing a CD, Zip, or Other Externally Accessible Drive in a
Mini Tower Chassis
CAUTION:
Before you perform this procedure, see
For You and Your
Computer."
Turn off the computer and peripherals, disconnect them from their
1
electrical outlets, wait at least 5 seconds, and then
computer
cover.
Rotate the power supply
2
Remove the front
panel.
3
Remove the drive bracket from the chassis drive bay you want to use.
4
Squeeze together the metal tabs that extend from each side of the
drive bracket, and pull the bracket out of the bay (see the following
figure).
away from the system board.
"Safety First—
remove the
In s ta l l i n g U p gr a d e s
69

Advertisement

Table of Contents
loading

Table of Contents