Dell Precision 330 User Manual page 84

84 Ins ta l l i n g Up g r a d es
If you are installing an EIDE device, ensure that the IDE interface
a
cable is properly connected to the EIDE connector on the system
board. For more information, see
Guidelines."
If you are installing a SCSI device, ensure that the SCSI interface
b
cable is properly connected to the interface connector on the SCSI
controller board. For more information, see
Installation Guidelines."
Connect a DC power cable to the power input connector on the back
10
of the drive (see the following figure).
"EIDE Device Installation
"SCSI Device