Dell Precision 330 User Manual page 95

R e m o v i n g t h e A G P C a r d B r a c e ( M i n i To w e r C h a s s i s )
Front of
Computer
tab
slot
Rotate the brace up until it disengages from the card guide at the front
3
of the chassis. Then lift the brace away from the chassis.
To replace the AGP card brace, perform the following steps:
Insert the tab on one end of the brace into the slot on the card guide at
1
the front of the chassis. See
Tower Chassis)."
Lower the brace, ensuring that the AGP retention lever on the bottom
2
of the brace is aligned with the top of the AGP card.
Replace the screw that secures the brace to the chassis.
3
expansion-card guide
"Removing the AGP Card Brace (Mini
AGP card brace
screw
In s ta l l i n g U p gr a d e s
95