Dell Precision 330 User Manual page 82

82 Ins ta l l i n g Up g r a d es
NOTE:
Orient the drive in the bracket so that its bottom will face the left
side of the chassis when the bracket is installed in the chassis.
Reinstall the hard-drive bracket in the chassis (see the following
8
figure).
Insert the drive bracket into the chassis, sliding it in until the tabs snap
into place. Rotate the drive door upward to the chassis until it snaps
securely into place.
NOTE:
When you rotate the drive door back into place, ensure that the
tabs on the drive door are inserted between the drive bracket and the drive
cage.
NOTE:
Be sure to fold down the drive door handle so that the front panel
can be replaced on the chassis.