18. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
18.1 CS-Z20VKR CS-Z25VKR CS-Z35VKR CS-Z42VKR
18.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
18.1.1.1
To Remove Front Grille
2.
Remove 1 screw at the
middle of front grille.
18.1.1.2
Caps Removal
WARNING
1.
Remove 2 caps and 2 screws at the
bottom of front grille.
Figure 1
143
3.
Use long nose pliers
to pull out the caps.
a.
Use a manual screw driver with at least 150 mm shaft
length. Do not use a hand drill type.
b.
Slightly tilt the screw driver handle downward so that the
shaft does not touch the flap. Be careful not to scratch the
flap while undoing the screws.
Hold both sides of the front grille
and gently remove it by pulling up
and toward yourself.
CAUTION