18.1.1.3
To Remove Electronic Controller
5.
Detach the terminal wire (Black),
terminal wire (Red) and earth wire screws.
7.
Remove screw to remove
terminal board complete.
6.
Detach CN-DISP and CN-RCV
connectors from indicator complete.
Figure 3
Figure 2
8.
Pull out the
9.
electronic
controller halfway.
CN-NANO
144
3 Hooks (Top, left
and right hand side)
4.
Remove control board
cover by releasing 3 hooks.
Detach all connectors as labelled from the
electronic controller. Then pull out the
electronic controller gently.
CN-TH
Figure 4
AC303 (WHT)
CN-FM
CN-STM2
CN-STM3
CN-STM1