Table of Contents
Advertisement
Introduction
1.2 Description
•
1.2
Description
The RUGGEDCOM M2200F features various ports, controls and indicator LEDs on the
display panel for connecting, configuring and troubleshooting the device. The dis-
play panel can be located on the rear, front or top of the device, depending on the
mounting configuration.
1
2
3
4
5
6
7
Figure 1.1
Communication Ports
Port Status Indicator LEDs
Display Mode Indicator LEDs
2
CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Fiber or Copper Ethernet Ports
Port Status Indicator LEDs
Mode Button
RS-232 Serial Console Port (RJ45)
Display Mode Indicator LEDs
Alarm Indicator LED
Power Module Indicator LEDs
RUGGEDCOM M2200F
1
Ports for communicating with other devices or accessing the
RUGGEDCOM RUGGEDCOM M2200F operating system are de-
scribed in
"Communication Ports (Page
Port status indicator LEDs indicate the operational status of each
port, dependent on the currently selected mode.
Mode
Status
Green (Solid)
Green (Blinking)
Off
Duplex
Green
Orange
Off
Speed
Green (Solid)
Green (Blinking)
Orange (Solid)
Off
The display mode indicator LEDs indicate the current display mode
for the port status indicator LEDs (i.e. Status, Duplex or Speed).
5
2
3
4
21)".
Color/State
Description
Link detected
Link activity
No link detected
Full duplex mode
Half duplex mode
No link detected
100 Mbps
1000 Mbps
10 Mbps
No link detected
RUGGEDCOM M2200F
Installation Manual, 01/2020, C79000-G8976-1343-06
6
7
Advertisement
Table of Contents
