Advertisement
Quick Links
DEAD FRONT KNOCKOUT REMOVAL INSTRUCTIONS
11. Stand the deadfront on the floor with the plate to be
removed in the upper position as shown below.
Grasping the upper edge of the deadfront, strike the
center of the front surface of the knockout plate with a
hammer until two of the plate attachment splices are
broken.
12. Bend the plate back-and-forth about the two remain-
ing attachments until the plate breaks free.
GRASP DEADFRONT
IN THIS AREA
CENTER OF
KNOCKOUT
PLATE
FRONT OF
DEADFRONT
FLOOR
-4-
s
S1, S2, and P1 Panelboard Kit
MBKBC3 for Main or Subfeed
BQD breakers
Installation
Instructions
12-A-1011-01 Rev. 5
Advertisement
Related Manuals for Siemens MBKBC3
Summary of Contents for Siemens MBKBC3
- Page 1 12. Bend the plate back-and-forth about the two remain- ing attachments until the plate breaks free. S1, S2, and P1 Panelboard Kit GRASP DEADFRONT Installation MBKBC3 for Main or Subfeed IN THIS AREA Instructions CENTER OF KNOCKOUT BQD breakers...
- Page 2 Installation Instructions The following instructions are for the installation of a Siemens main/subfeed breaker kit for BDQ breakers in S1, S2, and P1 Type panelboards. The kit may be installed as a main or a subfeed in panels rated 250 amps or less. Above 250 amps it may be installed in subfeed applications only.