Related Manuals for Siemens Milltronics Tilt Switch
Summary of Contents for Siemens Milltronics Tilt Switch
- Page 1 Instruction Manual September 2004 tilt switch MILLTRONICS Process Instruments M. R. Štefánika 175/45, 017 01 Považská Bystrica tel./fax: 00421 42 432 3946, e-mail: proinst@stonline.sk...
- Page 2 Peterborough, Ontario, Canada, K9J 7B1 Email: techpubs.smpi@siemens.com • For a selection of Siemens Milltronics level measurement manuals, go to: www. siemens.com/processautomation. Under Process Instrumentation, select Level Measurement and then go to the manual archive listed under the product family. •...
-
Page 3: Milltronics Tilt Switch Probe
Milltronics Tilt Switch Probe The Milltronics Tilt Switch probe is an electro-mechanical tilt switch for point level detection, plugged chute detection, belt tracking alarm, and feed loss detection on conveyor belts. Tilt switches also provide simple high and low alarm for both dry bulk solids and liquids. -
Page 4: Probe - Outline And Dimensions
Probe – Outline and Dimensions Tilt Switch Schematic cable: - low temp: 6 m (20 ft) std. length -high temp: 1.5 m (5 ft) std. length ½" NPT (internal thread) for connection to conduit 250 mm (10") 180 mm (7") material: 304 stainless steel ½"... -
Page 5: Dry Level Detection
Applications Dry Level Detection no flow indication plugged chute detection high level intermediate level alarm Mounting • The Tilt Switch Probe should be suspended by rigid conduit from a vibration-free support out of the path of falling material. • A float, flat paddle or cross paddle level alarm extension should be used with fine... - Page 8 Siemens Milltronics Process Instruments Inc. Siemens Milltronics Process Instruments Inc. 2004 1954Technology Drive, P .O. Box 4225 Subject to change without prior notice Peterborough, ON, Canada K9J 7B1 Rev. 1.0 Tel: (705) 745-2431 Fax: (705) 741-0466 *7ml19985FL01* Email: techpubs.smpi@siemens.com...