MEITRACK TC68L/TC68SL Plug-and-Play Vehicle GPS Tracker User Guide
1 Copyright and Disclaimer
Copyright © 2019 MEITRACK. All rights reserved.
,
and
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for
any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying
and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but
not limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or
illegality to use the product or documentation.
2 Friendly Reminder
2.1 Use Notice
Power off the device before you go to a gas station, hazard zone, or a place where wireless products are
prohibited.
Do not expose the device to rain or extremely hot temperatures.
The device's tracking function may be unavailable due to force majeure (like bad weather and GPS blind spots).
To strength the device signal, keep away from a metal covered place when you use an extension cord.
The device's operating voltage is DC 11.5–36 V, and you can install it into a 12 V/24 V vehicle.
Ensure that the vehicle engine is cut off before installation.
The device's extension cord you purchase additionally can be used to strength the GPS signal.
2.2 Device and Accessories
Check whether the product and standard accessories are included according to the following table. You can
additionally purchase optional accessories as required.
Device and Standard Accessories
NO.
Item
1
TC68L/TC68SL tracker
2
Packing box
3
CD download card
Optional Accessories
NO.
Item
1
OBD extension cord
2
Velcro
3
USB cable
Copyright © 2019 Meitrack Group All rights reserved.
are trademarks that belong to Meitrack Group and its subsidiary.
Quantity
1
1
1
Quantity
1
1
1
- 4 -
Need help?
Do you have a question about the TC68L and is the answer not in the manual?