Maintenance - MasterCraft 55-6863-0 Operating Manual

MAINTENANCE

Before cleaning or performing any maintenance, make sure that the Mitre Saw has
been disconnected from the power supply. Keep all ventilation openings clean. Avoid
using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use a
clean cloth to remove dirt, oil and grease.
WARNING: Do not allow improper materials, such as brake fluids, gasoline,
petroleum-based products, penetrating oil, etc., to come in contact with plastic parts
as improper materials contain chemicals that can damage, weaken or destroy plastic.
WARNING: To ensure safety and reliability, all repairs should be performed by
a qualified service technician.
25