Table of Contents
Advertisement
Removing and installing components
Recommended tools
The procedures in this document may require the following tools:
•
Phillips screwdriver #0
•
Phillips screwdriver #1
•
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
2280 solid-state drive
thermal bracket
2230 solid-state drive
thermal bracket
2230 solid-state drive
Base cover
Battery
Battery
Processor fan
Display-assembly cable
holder
Display hinges
Secured to
Screw type
Solid-state drive and
M2x4
system board
System board
M2x4
System board
M2x4
Palm-rest and
M2x5
keyboard assembly
Palm-rest and
M2x3
keyboard assembly
Palm-rest and
M2x4
keyboard assembly
System board and
M2x4
palm-rest and
keyboard assembly
Palm-rest and
M2x4
keyboard assembly
Palm-rest and
M2.5x2.5
keyboard assembly
Quantity
Screw image
2
1
1
6
4
4
2
2
8
Removing and installing components
2
9
Advertisement
Table of Contents
