Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Vostro 15-7580
  6. Owner's manual

Dell Vostro 15-7580 Owner's Manual

Hide thumbs Also See for Vostro 15-7580:

Advertisement

Quick Links

Download this manual
Dell Vostro 15-7580
Owners Manual
Forordningsmodel: P71F
Forordningstype: P71F002

Advertisement

loading

Related Manuals for Dell Vostro 15-7580

Summary of Contents for Dell Vostro 15-7580

  • Page 1 Dell Vostro 15-7580 Owners Manual Forordningsmodel: P71F Forordningstype: P71F002...
  • Page 2 ADVARSEL angiver risiko for tingskade, personskade eller død. © 2018 Dell Inc. eller dets datterselskaber. Alle rettigheder forbeholdes. Dell, EMC, og andre varemærker er varemærker tilhørende Dell Inc. eller deres associerede selskaber. Andre varemærker kan være varemærker for deres respektive ejere.

  • Page 3: Table Of Contents

    Indholdsfortegnelse 1 Sådan arbejder du med computeren....................... 7 Sikkerhedsforanstaltninger..............................7 Standby-tilstand................................7 Forbindelse..................................7 Beskyttelse mod elektrostatisk afladning (ESD)...................... 7 ESD-feltservicesæt ..............................8 Transport af følsomme komponenter........................9 Før du udfører arbejde på computerens indvendige dele....................9 Efter du har udført arbejde på computerens indvendige dele..................10 2 Sådan fjernes og installeres komponenter.....................

  • Page 4: Table Of Contents

    Installing the system board............................33 Strømstikport..................................34 Removing the power connector port........................34 Installing the power connector port........................35 Kølelegeme ..................................35 Removing the heat sink assembly..........................35 Installing the heat sink assembly..........................37 Berøringsplade.................................. 37 Removing the touchpad............................37 Installing the touchpad.............................. 39 LED-kort....................................39 Removing the LED board............................39 Installing the LED board............................

  • Page 5: Table Of Contents

    Ports and Connectors..............................71 Display specifications................................71 Keyboard................................... 72 Touchpad...................................72 Storage....................................73 Battery specifications..............................73 Adapter options................................74 Webcam specifications..............................74 System dimensions Vostro 15-7580..........................75 Environmental...................................75 5 Systeminstallationsmenu..........................77 Startmenu..................................77 Navigationstaster................................77 Indstillinger i systeminstallationsmenuen........................78 Generelle indstillinger..............................78 System configuration..............................79...

  • Page 6: Table Of Contents

    Opdatering af BIOS på systemer med bitlocker aktiveret..................90 Sådan opdaterer du din system-BIOS ved hjælp af USB-flashdrev..............90 Opdatering af Dell BIOS i Linux- og Ubuntu-miljøer....................91 Sådan flashes BIOS fra F12-engangsstartmenuen....................91 System and Setup Password (System- og installationsadgangskode)..............95 Sådan tildeles systemadgangskode og installationsadgangskode...............

  • Page 7: Sådan Arbejder Du Med Computeren

    Anvend sko med ikke-strømledende gummisåler for at reducere risikoen for elektrisk stød. Standby-tilstand Dell-produkter med standby-tilstand skal frakobles, før du åbner kabinettet. Systemer, der indbefatter standby-tilstand, er grundlæggende strømforsynet, også når de er slukkede. Den interne strøm gør det muligt at tænde for systemet (vække på LAN) og sætte det på...

  • Page 8: Esd-Feltservicesæt

    På grund af den øgede tæthed i de halvledere, der anvendes i nyere Dell-produkter, er følsomheden over for statisk skade nu højere end i tidligere Dell-produkter. Af denne grund gælder nogle tidligere godkendte metoder til håndtering af dele ikke længere.

  • Page 9: Transport Af Følsomme Komponenter

    Transport af følsomme komponenter Ved transport af ESD-følsomme komponenter, som reservedele eller dele, der skal returneres til Dell, er det vigtigt at placere disse dele i antistatiske poser for sikker transport.

  • Page 10: Efter Du Har Udført Arbejde På Computerens Indvendige Dele

    Når du har udført udskiftningsprocedurer, skal du sørge for at tilslutte eksterne enheder, kort og kabler, før du tænder computeren. FORSIGTIG: For at undgå beskadigelse af computeren, må du kun bruge det batteri, der er beregnet til denne specifikke Dell- computer. Brug ikke batterier, som er beregnet til andre Dell-computere.

  • Page 11: Sådan Fjernes Og Installeres Komponenter

    Sådan fjernes og installeres komponenter Bunddæksel Removing the base cover Follow the procedure in Before working inside your computer. To remove the base cover: Loosen the single M2.5x2+3.5 captive screw that secures the base cover to the system [1]. b Pry the base cover from the edge [2]. BEMÆRK: You may need a plastic scribe to pry the base cover from the edge.

  • Page 12: Installing The Base Cover

    Installing the base cover Align the base cover with the screw holder on the system. Press the edges of the cover until it clicks into place. Tighten the M2.5x2+3.5 screw to secure the base cover to the system. Follow the procedure in After working inside your computer.

  • Page 13: Installing The Battery

    Lift the battery away from the system. Installing the battery Insert the battery into the slot on the system. Connect the battery cable to the connector on the system board. Sådan fjernes og installeres komponenter...

  • Page 14: Møntcellebatteri

    Replace the M2x3 screws that secure the battery to the system. Install the base cover Follow the procedure in After working inside your computer. Møntcellebatteri Removing the coin cell battery Follow the procedure in Before working inside your computer. Remove the: base cover battery To remove the coin cell battery:...

  • Page 15: Hukommelsesmoduler

    Hukommelsesmoduler Removing the memory module Follow the procedure in Before working inside your computer. Remove the: base cover battery To remove the memory module: Pry the retention clips securing the memory module until the memory pops-up [1]. b Lift the memory module away from the system [2]. Installing the memory module Insert the memory module into the memory module socket until the clips secure the memory module.

  • Page 16: Harddisk

    Harddisk Removing the hard drive Follow the procedure in Before working inside your computer. Remove the: base cover battery To disconnect the cable: Lift the latch and disconnect the hard drive cable from the system [1]. b Pry the hard drive cable to release from the adhesive [2]. To remove the hard drive: Remove the four (M2.5x3) screws that secure the hard drive to the system [1].

  • Page 17: Installing The Hard Drive

    Installing the hard drive Insert the hard drive into the slot on the system. Replace the M2.5x3 screws to secure the hard drive assembly to the system. Affix the hard drive cable on the system. Connect the hard drive cable to the connector on the system board. Install the: battery base cover...

  • Page 18: Installing The M.2 Solid State Drive — Ssd

    Installing the M.2 Solid State Drive — SSD Insert the SSD into the connector on the system. Replace the M2x3 screw to secure the SSD to the system. Install the: battery base cover Follow the procedure in After working inside your computer.

  • Page 19: Installing The Wlan Card

    Disconnect the WLAN antenna cables from the connectors on the WLAN card [3]. d Lift the WLAN card away from the system [4]. Installing the WLAN card Insert the WLAN card into the slot on the system. Connect the WLAN antenna cables to the connectors on the WLAN card. Place the wireless card holder to its place and replace the M2x3 screw to secure the holder to the system.
  • Page 20 b Pry the rear cover from the edge, starting from the two recess points near the center of the rear cover [2]. BEMÆRK: You may need a plastic scribe to pry the rear cover from the edge. Pry the edges from the left and right side until the retention tabs are released. Sådan fjernes og installeres komponenter...

  • Page 21: Installing The Rear Cover

    Remove the rear cover from the system. Installing the rear cover Press the edges of the rear cover until it clicks into place. Replace the M2x2 screws that secure the rear cover to the system. Sådan fjernes og installeres komponenter...

  • Page 22: Bagdæksel

    Install the: battery base cover Follow the procedure in After working inside your computer. Bagdæksel Removing the back cover Follow the procedure in Before working inside your computer. Remove the: base cover battery WLAN card rear cover To disconnect the cables: Disconnect the camera cable and unroute from the routing channel [1, 2].
  • Page 23 d Unroute the eDP cable from the routing channel [4]. Disconnect the following cables: Disconnect the Power, LED and Keyboard backlight cable from the connector on the system board [1]. b Disconnect the touchpad cable from the connector on the system board[2]. Peel the adhesive tape and disconnect the keyboard cable from the connector on the system board [3, 4].
  • Page 24 Remove the nineteen (M2.5x6) screws that secure the back cover to the system. Sådan fjernes og installeres komponenter...
  • Page 25 Remove the four (M2x3) screws and turn over the system [1, 2]. Open the display assembly at 90° angle. Sådan fjernes og installeres komponenter...
  • Page 26 To remove the back cover: Using a plastic scribe, pry the edges of the plamrest [1, 2]. b Lift the plamrest away from the back cover [3]. Sådan fjernes og installeres komponenter...
  • Page 27 The component you are left with is the back cover. Sådan fjernes og installeres komponenter...

  • Page 28: Installing The Back Cover

    BEMÆRK: For complete replacement of the back cover, the following parts need to be removed: the Memory, System Board, Speakers and DC-In cable. Installing the back cover Press the edges of the back cover until it clicks into place. Close the display assembly and turn over the system. Replace the four (M2x3) and nineteen (M2.5x6) screws to secure the back cover to the system.
  • Page 29 SSD card WLAN card memory module rear cover back cover To remove the speaker: Disconnect the speaker cable from the connector in the system board [1]. b Unroute the cable from the routing channel [2, 3, 4]. Lift the speakers, along with the speaker cable, away from the back cover. Sådan fjernes og installeres komponenter...

  • Page 30: Installing The Speaker

    Installing the speaker Align the speakers along the slots on the system. Route the speaker cable through the routing tabs on the system. Connect the speaker cable to the connector in the system board. Install the: back cover rear cover memory module WLAN card hard drive...
  • Page 31 rear cover back cover Disconnect the following cables: Disconnect the coin cell battery cable from the connector on the system board [1]. b Disconnect the hard drive cable from the connector on the system board [2]. Disconnect the DC-in connector from the system board [3]. Remove the following metal tabs: Remove the two (M2.5x5) screws that secure the DC-in metal bracket on the system board [1].
  • Page 32 Remove the four (M2x3) screws that secure the system fan to the system board. Sådan fjernes og installeres komponenter...

  • Page 33: Installing The System Board

    To remove the system board: Remove the three (M2.5x5) screws that secure the system board to the system [1]. b Carefully lift the left side of the system board and remove the system board from the system [2]. BEMÆRK: For complete replacement of the system board the heatsink needs to be removed. Installing the system board Align the system board into its original position on the system.

  • Page 34: Strømstikport

    Strømstikport Removing the power connector port Follow the procedure in Before working inside your computer. Remove the: base cover battery SSD card WLAN card memory module rear cover back cover system board To remove power connector port: Unroute the power connector port from the routing channel [1]. b Remove the power connector port from the system [2].

  • Page 35: Installing The Power Connector Port

    Installing the power connector port Place the power connector port on the system. Route the power connector port cable through the routing channels on the system. Install the: system board back cover rear cover memory module WLAN card SSD card battery base cover Follow the procedure in...
  • Page 36 To remove the heat sink assembly: Turn over the system board and remove the six (M2x3) screws (6 > 5 > 4 > 3 > 2 > 1) that secure the heat sink assembly to the system board [1]. BEMÆRK: Remove the screws based on the numbering on the heat sink.

  • Page 37: Installing The Heat Sink Assembly

    Installing the heat sink assembly Replace the heat sink assembly on the system board. Replace the six M2x3 screws to secure the heat-sink assembly to the system board. BEMÆRK: Tighten the screws based on the order mentioned in the removal procedure. Turn over the system board.
  • Page 38 rear cover back cover Remove the four (M2x2) screws that secure the touchpad assembly to the palmrest [1]. Slide the touchpad assembly from the display assembly [2]. Lift the touchpad assembly from the palmrest. Sådan fjernes og installeres komponenter...

  • Page 39: Installing The Touchpad

    Installing the touchpad Place the touchpad assembly into the slot on the system. Replace the four (M2x2) screws that secure the touchpad assembly to the system. Install the: back cover rear cover memory module WLAN card SSD card battery base cover Follow the procedure in After working inside your computer.

  • Page 40: Installing The Led Board

    Installing the LED board Place the LED board into the slot on the display assembly. Replace the single (M2x3) screw that secures the LED board on the display assembly. Connect the LED board cable to the display assembly. Install the: back cover rear cover memory module...
  • Page 41 battery SSD card WLAN card memory module rear cover back cover To release the power button board: Lift the latch and disconnect the power button board cable from the power button board [1]. b Peel the adhesive tape that covers the power button board cable [2] and pry the power button board cable from the palmrest. To remove power button board: Remove the two (M2x3) screws that secure the power button board to the palmrest [1].

  • Page 42: Installing The Power Button Board

    Installing the power button board Place the power button board into the slot on the palmrest. Replace the two (M2x3) screw that secures the power button board to the display assembly. Connect the power button board cable to the power button board and affix it to the palmrest. Install the: back cover rear cover...

  • Page 43: Fingeraftrykslæser

    Fingeraftrykslæser Removing the fingerprint reader Follow the procedure in Before working inside your computer. Remove the: base cover battery SSD card WLAN card memory module rear cover back cover power button board To release the fingerprint reader: Using a plastic scribe lift the fingerprint reader board [1]. b Remove the two (M2x2) screws that secure the fingerprint reader to the palm rest [2].

  • Page 44: Installing The Fingerprint Reader

    Installing the fingerprint reader Place the fingerprint reader into the slot on the palm rest. Replace the two (M2x2) screws that secure fingerprint reader on the display assembly. Install the: power button board back cover rear cover memory module WLAN card SSD card battery base cover...
  • Page 45 Remove the thirty (M1.6x2) screws that secure the keyboard bracket to the palmrest and lift the keyboard bracket [1, 2]. Remove the keyboard from the palm rest. Sådan fjernes og installeres komponenter...

  • Page 46: Installing The Keyboard

    Installing the keyboard Place the keyboard into the slot on the palm rest. Place the keyboard bracket above the keyboard. Replace the thirty (M1.6x2) screws that secure the keyboard bracket to the palm rest. Connect the following cables: power board cable b LED board cable keyboard backlight cable d touchpad cable...

  • Page 47: Skærmmodul

    Skærmmodul Removing the display assembly Follow the procedure in Before working inside your computer. Remove the: base cover battery SSD card WLAN card memory module rear cover back cover To remove hinge bracket: Remove the two (M2.5x5) screws that secure the hinge bracket to the display assembly [1]. b Lift the hinge bracket from the display assembly [2].

  • Page 48: Installing The Display Assembly

    The component you are left with is the display assembly. Installing the display assembly Place the display assembly on the system. Place the hinge bracket on the display assembly. Sådan fjernes og installeres komponenter...

  • Page 49: Håndfladestøtte

    Replace the M2.5x5L(2) screws to secure the hinge bracket to the display assembly. Install the: back cover rear cover memory module WLAN card SSD card battery base cover Follow the procedure in After working inside your computer. Håndfladestøtte Removing the palm rest assembly Follow the procedure in Before working inside your computer.

  • Page 50: Skærmfacet

    Install the following components on the new palm rest. display hinge display assembly keyboard fingerprint reader power button board LED board touchpad back cover rear cover WLAN card hard drive memory module SSD card coin cell battery battery base cover Follow the procedure in After working inside your computer Skærmfacet...
  • Page 51 rear cover back cover display assembly Using a plastic scribe, pry the inner bottom and inner side edges to release the display bezel from the display assembly [1, 2]. Remove the display bezel from display assembly. Sådan fjernes og installeres komponenter...

  • Page 52: Installing The Display Bezel

    Installing the display bezel Place the display bezel on the display assembly. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly. Install the: display assembly back cover rear cover memory module...

  • Page 53: Installing The Camera

    memory module rear cover back cover display assembly display bezel To remove the camera: Peel and slide the camera from the display [1]. b Disconnect the camera cable from the connector [2]. Lift the camera away from the system [3]. Installing the camera Place and affix the camera on the slot in the display assembly.

  • Page 54: Skærmhængsler

    SSD card battery base cover Follow the procedure in After working inside your computer. Skærmhængsler Removing the display hinge Follow the procedure in Before working inside your computer. Remove the: base cover battery SSD card WLAN card memory module rear cover back cover display assembly display bezel...

  • Page 55: Installing The Display Hinge

    Installing the display hinge Place the display hinge on the display assembly. Replace the eight (M2.5x2.5) screws to secure the display hinges to the display assembly. Install the: display bezel display assembly back cover rear cover memory module WLAN card SSD card battery base cover...
  • Page 56 To remove display panel: Remove the adhesive tape that covers the display (eDP) cable connector [1]. b Lift the latch and disconnect the display (eDP) cable from the connector on the display panel [2]. Lift the display panel [3]. Sådan fjernes og installeres komponenter...

  • Page 57: Installing The Display Panel

    Installing the display panel Connect the display (eDP) cable to the connector in the display panel. Affix the adhesive tape to secure the display (eDP) cable. Place the display panel to align with the screw holders on the display assembly. Replace the four (M2x2.5) screws to secure the display panel to the display assembly.

  • Page 58: Installing The Edp Cable

    Installing the eDP cable Place the eDP cable on the display panel. Route the eDP cable through the routing channel. Install the: display hinge display panel display bezel display assembly back cover rear cover memory module WLAN card SSD card battery base cover Follow the procedure in...

  • Page 59: Skærmmodulets Bagdæksel

    Skærmmodulets bagdæksel Removing the display back cover assembly Follow the procedure in Before working inside your computer. Remove the: base cover battery SSD card WLAN card memory module rear cover back cover display assembly display bezel display hinge display panel camera eDP cable The display back cover assembly is the remaining component, after removing all the components.
  • Page 60 display bezel display assembly back cover rear cover memory module WLAN card SSD card battery base cover Follow the procedure in After working inside your computer. Sådan fjernes og installeres komponenter...

  • Page 61: Teknologi Og Komponenter

    How to check the status of AC Adapter in BIOS? Restart / Power on your computer. At the first text on the screen or when the Dell logo appears, tap <F2> until the message Entering Setup appears. Under General > Battery Information, you will see AC Adapter listed.

  • Page 62: Ddr4-Detaljer

    DDR4-detaljer Der er små forskelle mellem DDR3- og DDR4-hukommelsesmoduler som vist nedenfor. Forskel i nøgleindhak Nøgleindhakket på et DDR4-modul er placeret anderledes end nøgleindhakket på et DDR3-modul. Begge indhak findes på indsætningskanten, men indhakkets placering på DDR4 er en smule anderledes for at forhindre modulet i at blive installeret på et inkompatibelt kort eller en inkompatibel platform.

  • Page 63: Usb-Funktioner

    USB-funktioner Universal Serial Bus eller USB blev introduceret i 1996. Det forenklede markant forbindelsen mellem værtscomputere og eksterne enheder såsom muse, tastaturer, eksterne drivere og printere. Lad os tag et hurtigt kig på USB-udviklingen, vist i nedenstående skema. Tabel 1. USB-udvikling Type Dataoverførselshastighed Kategori...

  • Page 64: Programmer

    Med dagens konstant stigende krav om dataoverførsel til high definition videoindhold, terabyte lagerenheder, digitalkameraer med høje mega-pixels osv.vil USB 2.0 ikke være hurtig nok. Ydermere vil USB 2.0-forbindelser aldrig komme tæt på den teoretisk maksimale overførselshastighed på 480 Mbps, der giver dataoverførsel på omkring 320 Mbps (40 MB/s) – det nuværende reelle maksimum. Til sammenligning vil USB 3.0/USB 3.1 Gen 1-forbindelser aldrig opnå...

  • Page 65: Usb Type-C

    Microsoft annoncerede, at Windows 7 ville understøtte USB 3.1 Gen 1, måske ikke lige i første release, men ellers i en Service Pack eller en opdatering. Det er ikke udelukket at tro, at efter en succesfuld release for support af USB 3.0/USB 3.1 Gen 1 i Windows 7, at SuperSpeed- support vil dryppe ned til Vista.

  • Page 66: Nvidia Geforce Gtx 1050Ti Graphics

    Power Consumption The NVIDIA GeForce GTX 1050 Graphics can be found in several notebook and desktop processors of different TDP classes (40 — 50 W). Key Specifications The following table contains the key specifications of the NVIDIA GeForce GTX 1050: Tabel 2.

  • Page 67: Nvidia Geforce Gtx 1060 Graphics

    Tabel 3. Key Specifications Specification NVIDIA GeForce GTX 1050 Ti HD Graphics Series NVIDIA GeForce GTX 1050 Ti Codename N17P-G1 Architecture Pascal Pipelines 768 - unified Core Speed * 1493 - 1620 (Boost) MHz Memory Bus Width 7000 MHz Shared Memory Technology 14 nm Features...
  • Page 68 Specification NVIDIA GeForce GTX 1060 Shared Memory Technology 16 nm Features Multi-Projection, G-SYNC, Vulkan, Multi Monitor DirectX DirectX 12_1 Teknologi og komponenter...

  • Page 69: Systemspecifikationer

    Webcam specifications • System dimensions Vostro 15-7580 • Environmental Processor Dell Vostro system is built with Intel Core i processors. Tabel 5. CPU Processors Support List Graphics Intel Core i5-8300H (up to 4.1 Ghz) Intel(R) UHD Graphics 630 Intel Core i7-8750H (up to 4.0 Ghz)

  • Page 70: Video

    Maximum Memory Configuration 32 GB 4 GB (1x4 GB) DIMM Configurations 8 GB (2x4 GB) 8 GB (1x8 GB) 12 GB (4 GB + 8 GB) 16 GB (2x8 GB) 16 GB (1x16 GB) 32 GB (2x16 GB) Video Tabel 7. Video Feature Specification Type...

  • Page 71: Connectivity Options

    Connectivity options Tabel 9. Connectivity option 7580 Network adapter RJ45- Rivet Killer LAN - E2400 Intel Wireless 1x1 802.11AC Wi-Fi + BT 4.2 LE Wireless Card WLAN QCA 802.11ac (2x2) + Bluetooth 4.1 QCA 802.11ac (1x1) Wireless Adapter+ Bluetooth 4.1 Ports and Connectors Tabel 10.

  • Page 72: Keyboard

    15.6 inch FHD Anti-Glare LCD display with LED backlight Diagonal 15.6 inch Native Resolution 1920 x 1080 Megapixels (millions of pixels) 2.07 Pixels per Inch (PPI) Contrast Ratio (min) 400:1 Refresh Rate 60 Hz U/D/R/L View Angle (min) 80/80/80/80 Pixel Pitch 0.179 mm Power Consumption (max) 4.05 W...

  • Page 73: Storage

    Supported Gestures Windows 10 2-finger scroll Supported 2-finger Pinch Supported 3-finger (Invoke Cortana Supported 3-finger (Multi-tasking) Supported 4-finger (Invoke Action Center) Supported 4-finger (Switch Desktop) Supported Storage Tabel 15. Storage Features Specifications Primary storage 2.5 inch 500 GB 7200 RPM HDD (7mm) 2.5 inch 1 TB 5400 RPM HDD (7mm) 128 GB M.2 2280 SATA SSD 256 GB M.2 2280 SATA SSD...

  • Page 74: Adapter Options

    Operating • Charge: 0 °C to 50 °C (32 °F to 122 °F) • Discharge: 0 °C to 70 °C (32 °F to 158 °F) Non-operating –20 °C to 65 °C (–4 °F to 149 °F) Charging time: Express Charge mode •...

  • Page 75: System Dimensions Vostro 15-7580

    Up to 1280 x 720 (0.92 MP) Resolution: Still Image Up to 1280 x 720 (0.92MP) Imaging Rate Up to 30 frames per second System dimensions Vostro 15-7580 This topic lists out the dimensions of the computer in detail. Tabel 19. System dimensions System dimension Features Weight (pounds/kilogram) Start from 6.24 lb/2.83 kg...
  • Page 76 Maximum Altitude: Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.2 to 10,668 m (–50 to 35,000 ft) Systemspecifikationer...

  • Page 77: Systeminstallationsmenu

    System and Setup Password (System- og installationsadgangskode) Startmenu Tryk på <F12>, når Dell-logoet vises, for at se en engangsstartmenu med en liste over gyldige startenheder på systemet. Menupunkterne Diagnostics (Diagnosticering) og BIOS Setup (BIOS-konfiguration) er også tilgængelige i menuen. Enhederne i menuen Start afhænger af systemets startenheder.

  • Page 78: Indstillinger I Systeminstallationsmenuen

    Taster Navigation Enter Vælger en værdi i det valgte felt (hvis det er relevant) eller følge linket i feltet. Mellemrumstast Udfolder eller sammenfolder en rulleliste, hvis relevant. Flytter til næste fokusområde. BEMÆRK: Kun for standard grafisk browser. Flytter til forrige side, indtil du får vist hovedskærmen. Når du trykker på Escape-tasten på hovedskærmen vises der en meddelelse, der beder dig om at gemme alle ændringer, som ikke er gemt, og som genstarter systemet.

  • Page 79: System Configuration

    Egenskab Beskrivelse Gør det muligt for dig at bestemme, om systemet skal bede UEFI Boot Path Security brugeren om at indtaste administratoradgangskoden ved start fra en UEFI-startsti. Klik på en af følgende muligheder: • Always, Except Internal HDD (Altid, undtagen intern harddisk) –...
  • Page 80 Option Description Allows you to enable or disable the internal/integrated USB USB Configuration configuration. The options are: • Enable USB Boot Support • Enable External USB Ports All the options are set by default. BEMÆRK: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

  • Page 81: Indstillinger For Videoskærm

    Option Description • 15 seconds • 30 seconds • 1 minute • 5 minutes • 15 minutes • Never Allows to define the timeout value for the keyboard backlight when Keyboard Backlight Tmeout on Battery the system is running only on battery power. The Keyboard Backlight tiemout value is only in effect when the backlight is enabled.
  • Page 82 Option Description Click OK once you set the password. BEMÆRK: For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password.

  • Page 83: Secure Boot

    Option Description Allows you to update the system BIOS via UEFI capsule update packages. UEFI Capsule Firmware Updates • Enable UEFI Capsule Firmware Updates This option is set by default. Allows you to enable or disable the Platform Trust Technology (PTT) during POST. PTT Security The options are: •...

  • Page 84: Indstillinger For Intel Sikkerhedsudvidelse Af Software

    Option Description This option is not set by default. The Custom Mode Key Management options are: • PK—Default • • • Indstillinger for Intel sikkerhedsudvidelse af software Tabel 25. Intel Software Guard Extensions (Intel sikkerhedsudvidelse af software) Egenskab Beskrivelse Dette felt giver mulighed for at skabe et sikkert miljø ved kørsel af Intel SGX Enable kode/lagring af følsomme oplysninger inden for det primære operativsystem.

  • Page 85: Power Management

    Option Description This option is set by default. C-States Control Allows you to enable or disable the additional processor sleep states. • C states This option is set by default. Allows you to enable or disable the Intel TurboBoost mode of the Intel TurboBoost processor.

  • Page 86: Post Behavior

    The options are: • Adaptive—Default • Standard - Fully charges your battery at a standard rate. • ExpressCharge- The battery charges over a shorter period of time using Dell’s fast charging technology. • Primarily AC use • Custom If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

  • Page 87: Virtualiseringsunderstøttelse

    Option Description • Thorough—Default • Auto Extended BIOS POST Time Allows you to create an additional preboot delay. Click one of the following options: • 0 seconds—Default • 5 seconds • 10 seconds Full Screen Logo Allows you to display full screen logo, if your image matches screen resolution. •...

  • Page 88: Wireless Options

    Wireless options Tabel 30. Wireless Option Description Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are: • WLAN • Bluetooth All the options are enabled by default. Allows you to enable or disable the internal wireless devices. Wireless Device Enable The options are: •...

  • Page 89: Systemlogfiler

    Hvis BitLocker er aktiveret, skal den deaktiveres, inden system BIOS'en opdateres, og derefter reaktiveres, når BIOS- opdateringen er fuldført. Genstart computeren. Gå til Dell.com/support. • Indtast Servicetag (Servicekoden) eller Express Service Code (Kode til ekspresservice) og klik på Submit (Send).

  • Page 90: Opdatering Af Bios På Systemer Med Bitlocker Aktiveret

    Kopier filen, fx O9010A12.EXE, til USB-flashdrevet, der kan startes fra. Tilslut USB-flashdrevet til det system, der kræver BIOS-opdateringen. Genstart systemet, og tryk på F12, når Dell-logoet viser engangsstartmenuen. Brug piletasterne til at vælge USB Storage Device (USB storageenhed), og klik på Return (Enter).

  • Page 91: Opdatering Af Dell Bios I Linux- Og Ubuntu-Miljøer

    De fleste Dell-systemer bygget efter 2012 har denne egenskab, og du kan bekræfte ved at starte dit system med F12-engangsstartmenuen for at se, om BIOS-flashopdatering er angivet som startindstilling for dit system. Hvis indstillingen er indstillet, understøtter BIOS'en denne BIOS-opdateringsform.
  • Page 92 Flash-menuen for BIOS'en åbnes. Klik derefter på Gennemse. E5450A14.exe-filen vises som eksempel på det følgende skærmbillede. Det faktiske filnavn kan variere. Systeminstallationsmenu...
  • Page 93 Når filen er valgt, vises den i boksen med valgte filer, og du kan klikke på OK for at fortsætte. Klik på knappen Begin Flash Update (Begynd flashopdatering). Systeminstallationsmenu...
  • Page 94 En advarselsboks vises og spørger dig, om du ønsker at fortsætte. Klik på knappen YES (Ja) for at begynde flash. På dette tidspunkt påbegyndes BIOS-flash, systemet genstarter, og så starter BIOS-flash, og en statuslinje viser flash-processen. Afhængig af ændringerne inkluderet i opdateringen kan statuslinjen gå fra 0 til 100 adskillige gange, og flash-processen kan tage op til 10 minutter.

  • Page 95: System And Setup Password (System- Og Installationsadgangskode)

    Når processen er gennemført, vil systemet genstarte, og BIOS-opdateringen vil være udført. System and Setup Password (System- og installationsadgangskode) Tabel 34. System and Setup Password (System- og installationsadgangskode) Adgangskodetype Beskrivelse System Password (Systemadgangskode) Adgangskode du skal indtaste for at logge på systemet. Setup password (Installationsadgangskode) Adgangskode, som du skal indtaste for at få...

  • Page 96: Sletning Eller Ændring Af En Eksisterende Opsætning Af Adgangskode

    Anvend følgende retningslinjer til at tildele systemadgangskoden: • En adgangskode kan have op til 32 tegn. • En adgangskode kan indeholde tallene 0 til 9. • Kun små bogstaver er gyldige, store bogstaver er ikke tilladt. • Kun følgende specialtegn er tilladt: mellemrum, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`). Indtast systemadgangskoden som du indtastede tidligere i feltet Confirm new password (Bekræft ny adgangskode) og klik på...

  • Page 97: Software

    Software Dette kapitel angiver de understøttede operativsystemer og instrukser til installation af drivere. Emner: • Operating system configurations • Chipset drivers • USB drivers • Network drivers • Audio drivers • Storage controller drivers • Bluetooth drivers • Security drivers Operating system configurations This topic lists the operating system supported by Vostro 7580 Tabel 35.

  • Page 98: Usb Drivers

    USB drivers Verify if the USB drivers are already installed in the computer. Software...

  • Page 99: Network Drivers

    Network drivers The driver is labeled as Intel I219-LM Ethernet Driver. Audio drivers Verify if the audio drivers are already installed in the computer. Storage controller drivers Verify if the storage controller drivers are already installed in the computer. Bluetooth drivers This platform supports a variety of Bluetooth drivers.
  • Page 100 Software...

  • Page 101: Fejlfinding

    De fundne punkter er angivet og vil blive testet Hvis der er problemer,,vises fejlkoder. Noter fejlkode og valideringsnummer, og kontakt Dell. To run a diagnostic test on a specific device Tryk Esc og klik på Yes (Ja) for at stoppe diagnosticeringstesten.

  • Page 102: Batteristatusindikatorer

    Batteristatusindikatorer Hvis computeren er tilsluttet en stikkontakt, virker batteriindikatoren på følgende måde: Blinker skiftevist Der er tilsluttet en ugyldig eller ikke-understøttet, ikke-Dell vekselstrømsadapter til den bærbare pc. Tilslut mørkegult eller hvidt batteristikket igen. Udskift batteriet, hvis problemet opstår igen. Blinker skiftevist Midlertidig batterifejl med vekselstrømsadapter til stede.

  • Page 103: Dell Docking Solution

    Thunderbolt 3 Type-C port does not support certain docking systems features The Vostro 15-7580 system do not support all of the Dell Docking solution features of the Dell Thunderbolt Dock TB16, Dell Dock WD15, Dell Universal Dock D6000, as well as third-party docking solutions features.

  • Page 104: Hybrid Power

    Hybrid Power Users may observe certain behaviors when the system is heavily loaded or in certain gaming conditions, such as: • Battery capacity does not increase even when connected to the power adapter. • Battery charges slowly when connected to the power adapter. The hybrid power feature in the Vostro 15–7580 systems enable the battery to output power to the system during heavy loading and in certain gaming conditions to support overall system power demand (as long as battery capacity is above 10 %).

  • Page 105: Sådan Får Du Hjælp

    Dells produktkatalog. Dell giver flere muligheder for online- og telefonbaseret support og service. Tilgængeligheden varierer for de enkelte lande og produkter, og nogle tjenester findes muligvis ikke i dit område. Sådan kontakter du Dell omkring salg, teknisk support eller kundeservice: Gå...