G Key; Removing The G Key - Dell G7 15 7500 Service Manual

G key

Removing the G key

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear cover.
4. Remove the rear-cover
5. Remove the processor
6. Remove the graphics-card
7. Remove the heat sink.
8. Remove the power-adapter
About this task
The following image indicates the location of the G key and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2x2.5) that secure the G-key board to the palm-rest and keyboard assembly.
2. Open the latch and disconnect the G-key cable from the system board.
3. Lift the G-key board off the palm-rest and keyboard assembly.
4. Remove the screw (M2x2.5) that secures the G key to the palm-rest and keyboard assembly.
5. Lift the G key off the palm-rest and keyboard assembly.
Before working inside your
bracket.
fan.
fan.
port.
computer.
Removing and installing components 51