Table of Contents
Advertisement
Steps
1. Align the screw holes on the processor fan with the screw holes on the system board and the palm-rest and keyboard assembly.
2. Connect the processor-fan cable to the system board.
3. Replace the two screws (M2x4) that secure the processor fan to the system board and the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Graphics-card fan
Removing the graphics-card fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the graphics-card fan and provides a visual representation of the removal procedure.
38
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Advertisement
Table of Contents
