Electromagnetic Compatibility Guidelines; Special Conditions For Marine Applications; Preparing The Environment - NI cRIO-9066 Getting Started Manual

Embedded real-time controller with reconfigurable fpga
Hide thumbs Also See for cRIO-9066:
Table of Contents

Advertisement

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
shielded cables and accessories.

Special Conditions for Marine Applications

Some products are Lloyd's Register (LR) Type Approved for marine (shipboard) applications.
To verify Lloyd's Register certification for a product, visit
the LR certificate, or look for the Lloyd's Register mark on the product.
Caution
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.

Preparing the Environment

Ensure that the environment in which you are using the cRIO-9066 meets the following
specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating humidity (IEC 60068-2-56)
Pollution degree
Maximum altitude
To ensure the specified EMC performance, operate this product only with
In order to meet the EMC requirements for marine applications, install the
ni.com/certification
-20 °C to 55 °C
10% RH to 90% RH, noncondensing
2
5,000 m
NI cRIO-9066 Getting Started Guide | © National Instruments | 3
and search for

Advertisement

Table of Contents
loading

Table of Contents