Table of Contents
Advertisement
Environmental
Safety
Note
For UL, Demko, and other safety certifications, refer to the product label or visit
ni.com/certification
appropriate link in the Certification column.
Electromagnetic Compatibility
For EMC compliance, operate this device with shielded cabling.
Note
© National Instruments Corporation
Operating temperature for NI 8352........ 5 to 40 °C
Operating temperature for NI 8353........ 5 to 35 °C
Storage temperature ............................... –10 to 60 °C
Relative humidity
Operating ........................................ 10 to 90% noncondensing
Nonoperational (storage) ................ 5 to 95% nonconducting
Operating location.................................. Indoor use
Altitude................................................... 2,000 m
Installation Category .............................. II
Pollution Degree .................................... 2
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 60950-1, EN-60950-1
•
UL 60950-1, CSA 60950-1
, search by model number or product line, and click the
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
•
EN 55024, CISPR 24 EMC requirements
•
EN 55022, CISPR 22 Emissions; Class A
•
CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
19
NI 8352/8353 Installation Guide
Advertisement
Table of Contents
