Dmx Mode - ProLights ECLFRESNELJTW User Manual

3.4 DMX MODE

• To set the DMX address, press the button MENU so many times until the display shows Connect, then
select throught the buttons UP/DOWN Dmx Address, then press the button ENTER.
• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To operate the ECLFRESNELJTW with a light controller, adjust the DMX start address for the first a DMX
channel. For example, If the controller is provided with to command the function of the first DMX channel,
adjust the start address 33 on the ECLFRESNELJTW. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
1 33
2 33
5 33
7 33
8 33
9 33
12 33
13 33
16 33
19 33
21 33
DMX Address: 33
DMX512 Controller
ECLFRESNELJTW
DMX Address Next possible start
occupied address for unit No. 1
33
33-34
33 - 37
33 - 39
33 - 40
33 - 41
33 - 44
33 - 45
33 - 48
33 - 51
33 - 53
DMX Address: 38
Next possible start
address for unit No. 2
34
35
38
40
41
42
45
46
49
52
54
DMX Address: 43
Fig.9 - Example 5 DMX channels configuration
Next possible start
address for unit No. 3
35
37
43
47
49
51
57
59
65
71
75
DMX Address: 48
13
36
39
48
54
57
60
69
72
81
90
96
. . . . . . . . . . . .