Table of Contents
Advertisement
Mounting the Sensor Array
The sensor array has been pre-assembled for easy installation. However, you
will still need to provide a solid mounting for the sensor array. Mounting hard-
ware has been included for the most common installations (see figures below).
If you are using the optional Mounting Tripod, consult the tripod's manual for
mounting instructions.
CAUTION: The station's wind direction is calibrated as if the horizontal part of the anemometer arm
were pointing south. If you plan to mount the station facing a different direction, consult
your owner's manual for instructions on how to adjust the wind vane accordingly.
MOUNTING ON A FENCE
Sensor Array
12"
minimum
Note: For roof mounting, we recommend the optional Mounting Tripod. If mounting on a roof, tower, or
other elevated structure without the Tripod, be sure to consider the effects of lightning, wind
loading and vibration and design the installation accordingly.
Page 6
Support Tube
(swaged end)
1-1/8" Saddle
5/16" Flat Washer
5/16" x 3" Lag Screw
Extension Tube
(21" long, no swaged end)
MOUNTING ON A POST
Extension Tube
(see fence mounting for details)
4 x 4
treated
post,
8' long
2' of
post
buried
EZ-Mount Weather Station
Sensor Array
Use post hole
digger, fill hole
with post hole
concrete
Advertisement
Table of Contents
