Additional Mounting Options - DAVIS vantage pro2 groweather User Manual

Integrated sensor suite with solar radiation sensor & 24-hour fan
Hide thumbs Also See for vantage pro2 groweather:
Table of Contents

Advertisement

Clear Data Collected During Testing and Installation
Now that the ISS is mounted outside, any data that was collected in the Vantage Pro2
console during testing and mounting can be cleared.
1. On the console, press the WIND so that graph icon appears adjacent to the wind
data on the display. Confirm that wind speed is displayed on the compass rose.
2. Press and release 2ND, then press and hold CLEAR for at least six seconds and
until you see "CLEARING NOW" in the console ticker display.

Additional Mounting Options

Extending Wireless Transmission Range
Optional repeater stations can be used to extend the wireless transmission range.
• Wireless Repeater, AC-Powered (#7626) or Solar-Powered (#7627)
• Long-Range Wireless Repeater, Solar-Powered (#7654)
Extending the Console Cable (Cabled ISS Only)
A cabled ISS can be extended up to 1000' (300 m) away from the console by using
Davis Instruments extension cables (#7876).
Relocating the Anemometer
Using Extension Cables:
ISS by using Davis Instruments extension cables (#7876).
Note:
Not all cables are compatible with your Vantage Pro2 system. To be sure they will work,
order Davis extension cables from your dealer or directly from Davis Instruments.
Be aware that the maximum measurable wind speed reading decreases as the total
length of cable from the anemometer to the ISS increases.
Note:
If the cable length is greater than 540' (165m), the maximum measurable wind speed
may be less than 100 MPH (161 km/h).
Using the Anemometer Transmitter Kit (Wireless ISS Only):
mitter Kit (#6332) allows the anemometer to send wind data directly to the console,
instead of plugging into the ISS.
Remote Mounting the Solar Radiation Sensor
The solar radiation sensor has a 3' (0.9 m) cable. If you wish to install this sensor away
from the ISS, you can extend the length of the sensor cables up to 125' (38 m) with Davis
Instruments extension cables (#7876).
Optional Wireless Stations
You may use our optional wireless sensor stations to collect weather measurements,
without the inconvenience of routing cables.
• Wireless Temperature Station (#6372)
• Wireless Temperature/Humidity Station (#6382)
• Wireless Leaf & Soil Moisture/Temperature Station (#6345)
For more details, please visit our website or see the most recent Davis Precision
Weather Instruments catalog.
30
The anemometer can be extended further than 40' from the
The Anemometer Trans-

Advertisement

Table of Contents
loading

Table of Contents