Owner's Manual
Icons and their uses you will see throughout this manual
You will need to make sure that your
assembly is square before tightening
your bolts.
For proper assembly you will need to
ensure that your structure is level
before proceeding to the next step.
Some steps in the assembly process
will require an extra set of hands. Make
sure you have a helper available.
This icon shows the size of an open
ended wrench. Using the wrench as
the fraction bar.
Tools Required for Installation
When you see this icon you
will need a socket wrench.
The icons below show the size
of attachments needed for
assembly.
This icon warns you to not over
tighten your bolts. This is to
prevent structural damage and
also splitering your wood.
This icon will show you what
drill attachments are needed.
For this example you will need
a Phillips head attachment,
1/4 driver, and 1/8 drill bit.
11