Quick SMS configuration
Default configuration has optimal parameters present to ensure best
performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
"
setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
Note: Before SMS text, two space symbols should be inserted.
GPRS settings:
2001 – APN
•
2002 – APN username (if there
•
are no APN username, empty
field should be left)
2003 – APN password (if there
•
are no APN password, empty
field should be left)
Server settings:
2004 – Domain
•
2005 – Port
•
2006 – Data sending protocol (0
•
– TCP, 1 – UDP)
Default configuration settings
Movement and ignition detection:
Vehicle movement will
be detected by
accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes
Vehicle drives 100
meters
Device makes a record On Stop if:
1 hour passes while
vehicle is stationary and
ignition is off
Records sending to server:
If device has made a
record it is sent to the
server every 120
seconds
After successful SMS configuration, FMM125 device will synchronize
time and update records to configured server. Time intervals and
default I/O elements can be changed by using
Configurator
or
SMS
parameters.
9
Ignition will be detected
by vehicle power voltage
between 13,2 – 30 V
Vehicle turns 10 degrees
Speed difference between
last coordinate and
current position is greater
than 10 km/h
Teltonika
FMM125 | Wiki