Assembly
Step 7
For each leg, attach a foot with
four (4) M6x14 Machine screws
and tighten in a cross pattern.
Step 8
Step 9
Lock the position of the center rails using
sixteen (16) M6x10 machine screws,
ensuring the screws come in contact with
the center rails by sliding them as needed.
14105 Avalon Boulevard, Los Angeles, CA 90061
Locate pre-drilled holes toward the front of
the desktop. You can use the set of holes on
either side, but we recommend using the
right side.
Using two (2) M5x16 Wood Screws, attach
the controller to the desktop.
x2
M5x16 Wood Screw
|
www.VersaTables.com
x4
M6x14 Machine screw
M6x10 Machine screw
|
Tel 310-353-7100
Fax 310-353-7109
x16