Related Manuals for VersaTables Edison
Summary of Contents for VersaTables Edison
- Page 1 Edison Desk - Assembly and Use Instructions 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...
- Page 2 Foot Side bracket Top frame Controller Desktop + control box (not included in this box) M5x20 Wood Screw 1/4-20 Phillips Bolt Power cord M6x14 Machine screw M6x10 Machine screw M5x16 Wood Screw Cable clip DIN6 cable 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...
- Page 3 Using the supplied Allen wrench, rotate each screw just a few times. M6x14 Machine screw After both screws are inserted, tighten both. Repeat this step for the second leg/frame assembly. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...
- Page 4 Attach the desk base to the desktop using eight (8) 1/4-20 Phillips Bolts for the side bracket holes going into the inserts. Use three (3) M5x20 Wood 1/4-20 Phillips Bolt Screws for the end frame holes going into the desktop. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...
- Page 5 Connect cable exiting Leg (controller & control box side) directly into the control box. Connect DIN6 cable to the other leg and to the control box. Connect controller cable to the control box. Connect the power cord to the control box. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...
-
Page 6: Troubleshooting
If the error message persists after the reset procedure contact Versa Tables. If the height difference between the legs exceeds 1.5 inches, stop the reset procedure and contact Versa Tables immediatly. If the controller displays “HOT”, allow the components to cool down for 20 minutes. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com... -
Page 7: Technical Specifications
To set new minimum and maximum height settings outside of the current settings, you will need to first remove the current minimum and maximum settings. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com... -
Page 8: Controller Lock
5 seconds for the display to return to “ASR”. Press the DOWN button until the desktop lowers slightly, then rises slightly and the display changes back to the numeric height setting. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com... - Page 9 1/4-20 Phillips Bolt Locate the four pre-installed inserts and align them with the holes in the brackets of the keyboard tray assembly. Using four (4) 1/4-20 Phillips Bolts, attach the Keyboard tray to the underside of the desktop. 14105 Avalon Boulevard, Los Angeles, CA 90061 Tel 310-353-7100 Fax 310-353-7109 www.VersaTables.com...