Page 1
VersaTables .com American Made & Guaranteed for Life Edison Electric Table - ELE-TB Assembly Instructions delete and insert product glam shot How can we improve our assembly instructions? Your comments and suggestions are important to us. Please e-mail us at: service@versaproducts.com.
Edison Electric Table Hardware List ELE-TB 1/4”- 20 Phillips Head 20mm Furniture Bolt 3/4 Phillips Pan Head M6 Screw Caster Bolt Screw Qty:10 Qty:8 Qty:16 Qty:20 Qty:4 Control Box A Cross End Cap Actuator 4mm Allen Wrench Control Box B...
Edison Electric Table Assembly Step-by-Step ELE-TB Step Control Box Fasten Control Box to the Main Surface using (4) Phillips Pan Head Screws. Sockets should face towards the front of the table. 3/4 Phillips Pan Head Screw Qty:4 3/4 Phillips Pan...
Page 5
Edison Electric Table Assembly Step-by-Step ELE-TB Step Controler Attach the Controller to Main Surface using (2) Phillips Pan Head Screws. 3/4 Phillips Pan 3/4 Phillips Pan Head Screw Qty:2 Control Button Cable Step Run Control Button Cable through Under Frame.
Edison Electric Table Assembly Step-by-Step ELE-TB Under Frame Step Fasten Under Frame to Main Surface using (8) 1/4-20 Phillips Head Bolts. 1/4-20 Phillips Head Bolt Qty:8 1/4 - 20 Phillips 1/4 - 20 Phillips Head Bolts Head Bolts Patch Cord Step Connect a Patch Cord to each Actuator.
Page 7
Edison Electric Table Assembly Step-by-Step ELE-TB Step Actuators Insert Actuators into sides of Under Frame. NOTE: If Actuators have a block on the tube, make sure the block facing the back on both of them. Block Step Actuators Secure Actuators to Under Frame using (2) M6 Screws on each Actuator.
Page 8
Edison Electric Table Assembly Step-by-Step ELE-TB Step Plugging in Make sure Actuators and Control Button are connected to Control Box. 3/4 Phillips Pan Control Head Screw Button Main Power Plug Qty:1 Patch Cord Actuator Actuator Patch Cord Power Control Cord...
Edison Electric Table Assembly Step-by-Step ELE-TB Step Legs Attach Legs to Actuators using (4) M6 Screws on each Leg. M6 Screw Qty:8 M6 Screw Step Kick Panel Attach Kick Panel to Actuators using 20mm (2) 20mm Furniture Bolts on each side.
Edison Electric Table Assembly Step-by-Step ELE-TB Casters Attach Casters to Legs. Caster Qty:4 Step Cross Support Attach Cross Support using (4) 20mm Furniture Bolts. 20mm Furniture Bolt Qty:4 20mm Furniture Bolts VersaTables.com Sales: Customer Service: 14105 Avalon Blvd. Call: 800-416-3961 Call: 424-244-2155 service@versaproducts.com...
Page 11
Edison Electric Table Assembly Step-by-Step ELE-TB Test and Flip Over Table Step Once assembled, the table needs to be plugged in and run all the way up and down three times while upside down to calibrate the Actuators. Make sure all of the Screws/Bolts are fully tightened and then flip the table over.
Page 12
Edison Electric Table Assembly Step-by-Step ELE-TB Instructions For Programming Controller With The Presets How To Store a Memory Position Favorite positions e.g. for sitting and/or standing can be stored. Follow the described procedure. How to store a position: 1. Drive Table’s surface to the height you wish to store.