VersaTables PowerLift L-Shaped Standing Desk Assembly And Use Instructions page 12

Add-on: Power Bar
Tools
Phillips screw-driver
(included)
Assembly
Step 1
Insert three (3) 1/4-20 Phillips Bolts into the 3 threaded inserts shown below and hand-tighten
about halfway. (DO NOT tighten all the way yet)
Step 2
Slide the Power Bar in by aligning the slots on the bottom of the power bar with the 3 bolts
inserted in the previous step. inserted in the previous step.
14105 Avalon Boulevard, Los Angeles, CA 90061
Parts
Desk Power Bar
x3
1/4-20 Phillips Bolt
www.VersaTables.com
Cable Tray
| |
Tel 310-353-7100 Fax 310-353-7109
x3 x3
1/4-20 Phillips Bolt