Advertisement
Add-on: CPU holder
Assembly
Step 3
Be sure that the Carriage Screws are facing
the Inside of the CPU Holder and the Thumb
Nuts and Washers are facing Outside.
Use the Thumb Nuts to adjust the CPU
Holder to the desired size.
Carriage Screw
Washer
Thumb Nut
Step 4
Slide the CPU holder into the Slide Bracket.
Step 5
Pass the lock pins through
the Slide Bracket holes.
|
|
14105 Avalon Boulevard, Los Angeles, CA 90061
Tel 310-353-7100
Fax 310-353-7109
www.VersaTables.com
Advertisement
