Advertisement
Assembly
Step 10
Ensure there is no gap between surfaces and that the
edges of all surfaces are flush with each other by
adjusting the
end frame with L-bracket (Fig. D)
Attach (2) link brackets using (2) 1/4-20 Phillips
Bolts for each bracket
Then, tighten the (4)
going through end frame with L-bracket from Step 4
all the way.
fig. D
Tighten
x4
M6x10 Machine screw
Step 11
Slide the control box back onto the
corner end frame. There are two place-
ment options, we suggest placing it on
the side closest to your controller.
14105 Avalon Boulevard, Los Angeles, CA 90061
(Fig. D)
1/4-20 Phillips
M6x10 machine screws (Fig D.)
M6x10 machine screws (Fig D.)
from Step 4
www.VersaTables.com
|
|
Tel 310-353-7100
Fax 310-353-7109
x4
1/4-20 Phillips Bolt
Advertisement
