Advertisement
Assembly
Step 12
Using the adhesive back, stick the Power Strip (PS) and BlueTooth App Box (BT) onto the
underside of the desktop as shown below.
Connect cable exiting Leg (closest to control box) directly into the control box (CB).
Connect 2 DIN6 cables to the other 2 leg cables and then to the control box.
Connect controller cable and control box to the BlueTooth App Box.
Connect the power cord to the control box and power strip,
as well as the BlueTooth App Box's power cord to the power strip.
Step 13
Using the adhesive-back cable clips, secure the cables so they do not sag.
Double check to ensure you don't have extra 'add-on' parts to install before proceeding.
With at least two people, grab the DESK BASE (NOT the desktop) and turn right-side up.
Adjust pre-installed glides on the feet as needed.
Plug the power cord into a 110V outlet.
14105 Avalon Boulevard, Los Angeles, CA 90061
CB
|
Tel 310-353-7100
www.VersaTables.com
(M1 -
(M2&M3 -
(HS -
orange)
(AC -
green)
BT
to outlet
PS
PS
|
Fax 310-353-7109
red)
red+blue)
Advertisement
