Mounting Options - Savoy House 56-5075-5CN-11 Owner's Manual

4. MOUNTING OPTIONS

If there isn't an existing UL listed mounting box,
then read the
Disconnect the power by removing fuses or
turning off circuit breakers.
Secure the outlet box directly to the building
structure. Use appropriate fasteners
building materials. The outlet box and its
support must be able to fully support the
moving weight of the fan (at least 50 lbs). Do
not use plastic outlet boxes.
Figures 1, 2 and 3 are examples of different
ways to mount the outlet box.
Note: You may need a longer downrod to
maintain proper blade clearance when
installing on a steep, sloped ceiling. (Fig. 3)
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4.
following instructions.
and
ANGLED CEILING
MAXIMUM 20° ANGLE
Recessed
outlet box
3
Outlet box
Figure 1
Outlet box
Figure 2
Provide strong
support
Ceiling
mounting
plate
Figure 3
Outlet box
Figure 4