ergoline Sunrise 6200 Smart Performance Operating Instructions Manual page 51

–
Part numbers (1) and the operational life (2) of the lamps are displayed.
–
The lamp card has been successfully activated when the lamp operational life is displayed as
'000:000'.
The error message is displayed if a card is held in front of the directional pad that is not a valid
lamp card.
The error message is displayed if a valid lamp card is removed before the end of the read opera-
tion. The read operation must be repeated.
The error message is displayed if a lamp card that has been previously activated is held in front
of the directional pad.
11/2019 1024210-00
Selection if data are to be transferred.
Press the OK button
Hold the lamp card in front of the directional pad.
 Hold the lamp card in front of the directional pad until 100% is reached.
Cleaning and maintenance
Operating instructions – 49/73