Smart Self- Powered Me Dal Lion Si Ren With Digi Tal Com Link - Clifford Concept 600UK How To Use Manual

Smart Self- Powered Me dal lion Si ren with Digi tal Com Link

This siren has its own built-in back-up battery, so even if a thief cuts all the wires, the
siren will continue to wail. Furthermore, this unique Clifford-designed and manufactured
siren has all these important additional enhancements:
Unbreachable Digital ComLink: Clifford's ingenious serial communications link
n
ensures that — if the system fuse is pulled, or if power to the system is interrupted, or if
any siren wire is tampered with whilst the system is armed — the siren will instantly
activate for five minutes. However, if the system is disarmed and power is interrupted
for authorised servicing, the siren remains silent. This eliminates the need for a special
separate shutoff key common to other battery-backed sirens. This ingenious Clifford
feature guards against any possibility of a thief tampering with your system siren.
Smart-charging: Other battery-backed sirens continually draw charging current
n
from your vehicle's battery. In time, this can drain the car's battery. Clifford's Smart
Self-Powered Medallion Siren only draws charging current whilst the vehicle's ignition
is on, i.e., whilst you're driving. This prevents battery drain.
Automatic low battery warning: If at any time the siren's back-up battery
n
voltage is very low, the usual arm and disarm chirps will be automatically muted to
alert you of the problem. Once the back-up battery is properly charged, the chirps will
automatically be restored.
Remote siren silencing: If the system is triggered by a non-threatening event, you
n
can silence the siren without having to remotely disarm and then re-arm. Simply press
button 1 (master remote control) or button
the siren is sounding. You'll hear two chirps (the usual armed indication) to confirm
the system has remained armed. If, however, you press this button whilst the siren is
sounding and either the vehicle's ignition is on or the bonnet, boot or a door is open,
you will instead hear 4 chirps to indicate that this may indeed be a genuine theft
attempt.
User-selectable chirp volume: As shipped from the factory, your system issues
n
QuietChirp™ acknowledgments. If you prefer, you may select full-volume LoudChirp™
acknowledgments. See the User-selectable features section on pages 21-22.
Long-term chirp silencing: Whenever you wish, you may silence the arm and
n
disarm chirps until you decide to restore them. Indicator light flashes continue to
provide visual confirmation of remote arming and disarming. See User-selectable
features on pages 21-22.
Remote controlled chirp muting: Remote chirp muting capabilities are
n
especially valuable when parking late at night in a quiet residential area or at any other
time when you want to arm or disarm silently. To arm or disarm silently, simply press
button 3 (master remote control) or simultaneously press buttons
(companion remote control) instead of the usual arming/disarming button.
Patented automatic noise abatement: The siren electronics limit alarm
n
sounding to five 30-second siren duration cycles even if a door is left open in the wake
of an intrusion. This ensures against car battery drain or vehicle towing due to noise
pollution ordinances. Your Concept 600 will then automatically reset itself to monitor
all other triggers and sensor inputs to continue to provide the utmost possible
protection.
(companion remote control) whilst
20
and