Built- In Ve Hi Cle Re Cov Ery/Anti- Carjacking Fea Ture; En Able/Dis Able The Anti- Carjacking Fea Ture; Your Se Cret Dis Arm Ing Code - Clifford Concept 600UK How To Use Manual

Dei clifford concept 600uk car alarms: user guide
Table of Contents

Advertisement

Built- in ve hi cle re cov ery/anti- carjacking fea ture

Concept 600's built-in BlackJax feature provides a safe and effective means of recovering
your vehicle after a theft or carjacking. In a carjacking situation, the sooner you are out
of the car the better. Don't resist or take anything with you, just get out and get away.
The instant the car door is opened, your Concept 600 takes charge. First it allows the
carjacker to drive a short distance, ensuring your safety. Then it repeatedly flashes the
brake lights and continuously sounds the siren to caution nearby drivers and draw
attention to your stolen vehicle. Then when the carjacker slows for a turn or traffic, it
safely shuts down the engine and dynamically prevents it from being restarted. The
system will ignore the remote control at this point (since the carjacker most likely took
your remote along with your keys).
Even if the carjacker is familiar with our system, your Concept 600 will assure that he
cannot restart the engine. Unable to do so, and with your stalled vehicle in the middle of
traffic — siren wailing and brake lights flashing — the carjacker has no choice but to
abandon your car. (The same occurs to anyone who steals your parked car from you at a
petrol station or in a car park, which are the most common carjacking sites). To recover
your vehicle, you simply walk a block or two to your car, enter your code, and the system
releases control of the vehicle to you.
VERY IMPORTANT: The factory setting for the anti-carjacking feature is OFF.
Once you are familiar with the following, we suggest you turn this feature ON
(see pages 21-22). When anti-carjacking is on, each time you begin driving
you MUST enter your disarming code via the PlainView 2 switch on the
dashboard or console (unless the system is in valet mode). You may turn this
feature on or off at any time.
Your secret disarming code tells the system that the car is being driven by an authorised
person. If you or a passenger opens and closes a car door at any point whilst the engine is
running (as would occur in a carjacking attempt), you must again enter your secret code.

En able/dis able the anti- carjacking fea ture

You may enable or disable the BlackJax anti-carjacking feature (see User-selectable
features on pages 21-22) or temporarily override it via PlainView 2 Coded Valet Mode
(see page 14).
Unless the BlackJax anti-carjacking feature is turned off or the system is in valet mode
(see page 14), 20 seconds after you switch on the ignition and press the brake (or open
and close a door whilst the engine is running), you must enter your secret disarming code
to let the system know it is you who is driving.
Your sys tem's factory- set dis arm ing code is noted on the back
cover of this man ual.
Defi ni tions
Digit: A digit is defined as any number from 0 to 9, inclusive.
n
Disarming code: A disarming code may be 1 to 4 digits in length, but the first digit
n
may not be a zero:
A 1-digit code = any number between 1-9
A 2-digit code = any number between 10-99

Your se cret dis arm ing code

4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Concept 600

Table of Contents