Table of Contents
Advertisement
A 3-digit code = any number between 100-999
A 4-digit code = any number between 1000-9999
PlainView 2 switch: A two-button switch mounted on the dashboard or console.
n
One of the buttons is marked with a raised , the other is unmarked. Each time you
drive your car, you must enter your secret disarming code via the PlainView 2 switch.
Entering a digit: To enter a digit, you press and release the
n
PlainView 2 switch the number of times of the digit to be entered, followed by pressing the
unmarked button. To enter a zero, you simply press and release the unmarked button.
Entering a code: To enter your code, just repeat the above for each digit of your
n
code.
EX AM PLE: To en ter a code of 1203, you would press and re lease
the Plain View 2 switch but tons thusly:
marked, un marked,
NOTE: You may NOT se lect a code that be gins with a zero. The
first digit of your code must be 1–9.
IM POR TANT: What you MUST do to drive your car
If you have the BlackJax anti-carjacking feature turned on, until you set your own
disarming code, you will use the factory-set code noted on the back cover of this manual.
To drive your car, do the following:
1. Shut all doors, then start the engine.
2. Enter the factory-set disarming code noted on the back cover of this manual using the
Entering a code: information noted above (you may do this whilst driving, if you wish).
The LED will light.
3. The LED will flash on for an instant after entry of the final digit to confirm proper
code entry. You may now drive or continue driving the vehicle.
What you MUST do if you hear 5 si ren chirps while driv ing
If you forget to enter the code, the system will remind you to do so 20 seconds after you
begin driving by "chirping" the siren 5 times and flashing the dashboard LED. At this
point, you have another 20 seconds to enter your code. When entered, the LED will stop
flashing and the siren will chirp once to confirm proper code entry. If the proper code is
not entered within 20 seconds after the 5-chirp signal, the engine will shut down as soon
as you slow for traffic or a turn. You may enter your disarming code even after the engine
is shut down. Once the proper disarming code is entered, you will be able to resume
driving.
"Guess ing" your code won't help a car jacker
What if the carjacker is familiar with Clifford's patented PlainView 2 coding system and
tries guessing codes at random? No problem. After three incorrect codes are entered, the
system will ignore any further code entries for a short time. So even if the carjacker were
to actually stumble upon your code during this time, he would still not be able to silence
your system or restart the engine.
How to set your own se cret dis arm ing code
You may choose any 1-, 2-, 3- or 4-digit code, but the first digit must not be a zero (e.g.,
1023 is a valid code, 0123 would not be a valid code). You can also change your code
whenever and wherever you want with the procedure noted on pages 21-22.
un marked,
un marked.
5
button of the
un -
con tin ued...
Advertisement
Table of Contents
